Skip to main content

ThinkSystem 1U Rear 2 x 2.5" NVMe Backplane Option Kit

See this document for information about the ThinkSystem 1U Rear 2 x 2.5" NVMe Backplane Option Kit.

This option kit comes with the following components.

ThinkSystem 1U Rear 2 x 2.5-inch NVMe Backplane option kit

1 2.5" NVMe 2-bay rear backplane (1)​

2 1U rear NVMe 2 x 2.5" HDD cage (1)​

3 1x2.5" drive filler (2)​

4 On-board NVMe cable to rear 2 x 2.5" NVMe, signal cable (1)​

5 Rear MB to rear HDD backplane (NVMe), power cable (1)​

6 Drive sequence label (1)​

NOTE
  • The illustration in this document might differ slightly from your hardware.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (October 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925