Skip to main content

ThinkSystem 1U Rear 2 x 2.5" SAS/SATA Backplane Option Kit

The option package contains the following items.

ThinkSystem 1U Rear 2 x 2.5" SAS/SATA Backplane option kit

1 2.5" SAS/SATA 2-bay rear backplane (1)​

2 1U rear SATA 2 x 2.5" HDD cage (1)​

3 1 x 2.5" drive filler (2)​

4 On-board SATA cable to front/rear backplane (1)​

5 On-board SATA cable to rear 2 x 2.5" SAS/SATA (1)​

6 SFF RAID to front 10 x 2.5" backplane + rear 2 x 2.5" backplane SATA/SAS G4 cable (1)​

7 CFF RAID to rear HDD 2 x 2.5" backplane SATA/SAS G4 cable (1)​

8 1U rear MB to rear HDD backplane (NVMe) (1)​

9 SFF front 3.5"/2.5" backplane + 2 x 2.5" G3 SATA/SAS cable (1)​

10 Drive sequence label (2)​

NOTE
  • Some cables may not be used in certain configurations.
  • The illustration in this document might differ slightly from your hardware.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (October 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925