Skip to main content

ThinkSystem SR630 V2 2x2.5" SATA/SAS Rear Drive Kit

See this document for information about the ThinkSystem SR630 V2 2x2.5" SATA/SAS Rear Drive Kit.

This option kit comes with the following components.

ThinkSystem SR630 V2 2x2.5"SATA/SAS Rear Drive kit

1 1U 2x2.5" SAS/SATA rear backplane (x1)​

2 1U rear 2x2.5" HDD cage (x1)​

3 1x1 2.5" drive filler (x2)​

4 Drive sequence label (x2)​

  • 1U rear 2x2.5" HDD sequence (SATA)

  • 1U rear 2x2.5" HDD sequence (SAS/SATA)

5 Power cable, 110/140 mm (x1)​

  • From the rear backplane to the riser card

6 SAS/SATA cable, 180 mm (x1)​

  • From the rear backplane to the system board

7 SAS/SATA cable, 270 mm (x1)​

  • From the rear backplane to the SFF RAID adapter

8 SAS/SATA cable, 590/270 mm (x1)​

  • From the front and rear backplanes to the SFF RAID adapter

9 SAS/SATA cable, 810 mm (x1)​

  • From the rear backplane to the CFF RAID adapter
NOTE

  • The illustration in this document might differ slightly from your hardware.

  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (October 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925