Skip to main content

ThinkSystem SR665 Rear 2x7mm SATA RAID Enablement Kit

This option kit comes with the following components.

ThinkSystem SR665 Rear 2x7mm SATA RAID Enablement Kit

1 One 7mm SATA/NVMe backplane (bottom)​

2 One 7mm SATA backplane (top)​

3 Two 7mm tray fillers​

4 One riser cage​

5 One 7mm drive cage​

6 One 7mm drive cage assembly​

7 Two M3 screws​

8 Eight M3.5 screws​

9 One power cable (175 mm)​

10 One signal cable (250 mm)​

11 Three labels (PCIe 1-2 and 7mm label, SATA label and PCIe 4-5 label)​

12 One signal cable for slot 3 (380 mm)​

NOTE
  • The illustration in this document might differ slightly from your hardware.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Third Edition (October 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925