ThinkSystem 2U V3 12x3.5" Expander Backplane Option Kit
See this document for information about the ThinkSystem 2U V3 12x3.5" Expander Backplane Option Kit.
This option kit comes with the following components.
1 One 12x3.5" expander backplane
2 Twelve 1-bay 3.5" drive fillers
3 Two labels
- One 2U 12x3.5" SATA HDD label
- One 12x3.5" SAS/SATA label
NOTE
The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation | Internal cable routing |
|---|---|---|
| SR650 V3 | Install the 3.5-inch front drive backplane | Internal cable routing |
| SR655 V3 | Install the front 3.5-inch drive backplane | Internal cable routing |
| SR665 V3 | Install the front 3.5-inch drive backplane | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (February 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925