ThinkSystem SD530 V3 E3.S 1T Backplane Kit

See this document for information about the ThinkSystem SD530 V3 E3.S 1T Backplane Kit.

This option kit comes with the following components.

1 One E3.S NVMe backplane

2 One BP power and sideband cable (power 2x8 to power 2x4, 645 mm)

3 One BP NVMe cable (MCIO x8 to MCIO x8, 315 mm)

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install the drive backplane" in SD530 V3 User Guide
  • "Internal cable routing" in SD530 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925