Skip to main content

ThinkSystem SD535 V3 Anybay 6 Drive Backplane Kit

See this document for information about the ThinkSystem SD535 V3 Anybay 6 Drive Backplane Kit.

This option kit comes with the following components.

ThinkSystem SD535 V3 Anybay 6 Drive Backplane Kit

1 One SD535 V3 6-bay anybay backplane

2 Three BP NVMe cable (MCIO x8 to MCIO x8, 100 mm)

3 One BP power cable (power 2x6 to power 2x4, 470mm)

4 One BP SATA cable (Low-profile SlimSAS x8 to SlimSAS x4*2, 115mm / 65 mm)

5 One BP sideband cable (sideband 2x10 to sideband 2x10, 150 mm)

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925