ThinkSystem SD665 V3 SATA Storage Option Upgrade Kit
See this document for information about the ThinkSystem SD665 V3 SATA Storage Option Upgrade Kit.
This option kit comes with the following components.
1 Drive cage for dual 7mm drives (including conduction plate and gap pad)
2 Four M3x5 screws
3 2 SATA drive cable
4 2 SATA/NVMe drive cable
NOTE
- The illustration in this document might differ slightly from your hardware.
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to "Install a drive cage assembly" in SD665 V3 User Guide.
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (November 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925