ThinkEdge SE350 V2 15mm SSD Module

See this document for information about the ThinkEdge SE350 V2 15mm SSD Module.

This option kit comes with the following components.

1 15mm drive module

2 Two 2.5-inch 15mm drive dummy fillers

3 One NVMe drive cable (BP1), 250mm

4 One drive BP power cable, 85mm

5 One SATA drive cable (BP1), 220mm

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install a drive cage" in SE350 V2 User Guide
  • "Internal cable routing" in SE350 V2 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (July 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925