Skip to main content

ThinkSystem SR630 V4 2x2.5" Gen5 AnyBay Rear Backplane Option Kit

See this document for information about the ThinkSystem SR630 V4 2x2.5" Gen5 AnyBay Rear Backplane Option Kit.

This option kit comes with the following components.

ThinkSystem SR630 V4 2x2.5-inch Gen5 AnyBay Rear Backplane Option Kit

1 Two 2.5" HDD fillers​

2 One SlimSAS x4 to SlimSAS x4 cable, 810mm​

3 One SlimSAS x4 to Mini-SAS HD x4 cable, 270mm​

4 One power cable, 250mm​

5 One MTK x8 to MCIO x8 cable, 280mm​

6 One SlimSAS x8 to SlimSAS x4*2 cable, 760/270mm​

7 One 2x2.5" SAS/SATA/NVMe backplane​

8 One 1U rear 2x2.5" cage with adapter​

9 Drive sequence/type labels​

  • One rear 2.5" HDD sequence label (SAS/SATA)
  • One rear 2.5" HDD sequence label (NVMe)
  • One rear 2.5" 16-17 label (SAS/SATA/U.3)
NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925