Skip to main content

ThinkSystem SR635 V3 7mm NVMe 2-Bay RAID Enablement Kit

See this document for information about the ThinkSystem SR635 V3 7mm NVMe 2-Bay RAID Enablement Kit.

This option kit comes with the following components.

ThinkSystem SR635 V3 7mm NVMe 2-Bay RAID Enablement Kit

1 One 2x7mm drive cage

2 Three M3.5 screws

3 Two 7mm tray fillers

4 One 7mm 2-bay rear backplane (top)

5 One 7mm 2-bay rear backplane (bottom)

6 One drive sequence label (NVMe)

7 One SlimSAS x4 to SlimSAS x4 cable, 125 mm

8 One power cable, 100mm/160 mm

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (April 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925