Skip to main content

ThinkSystem SR650/a V4 M.2 RAID B450p-2HS SATA/NVMe Enablement Kit

See this document for information about the ThinkSystem SR650/a V4 M.2 RAID B450p-2HS SATA/NVMe Enablement Kit.

The option kit comes with the following components.

ThinkSystem SR650/a V4 M.2 RAID B450p-2HS SATA/NVMe Enablement Kit

1 One rear M.2 backplane​

2 One 3FH M.2 riser cage​

3 One 1FH M.2 riser cage​

4 Two M.2 drive trays​

5 One M.2 power cable, 300 mm​

6 One M.2 signal cable, MCIO x4 to MCIO x4, 310 mm​

NOTE

  • The illustration in this document might differ slightly from your hardware.

  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware installationInternal cable routing
SR650 V4Install the rear M.2 riser cage and drive backplaneInternal cable routing
SR650a V4Install the rear M.2 riser cage and drive backplaneInternal cable routing
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925