ThinkSystem SR650 V3 7mm RAID B540p-2HS SATA/NVMe Enablement Kit

See this document for information about the ThinkSystem SR650 V3 7mm RAID B540p-2HS SATA/NVMe Enablement Kit.

This option kit comes with the following components.

1 SATA/NVMe 7mm backplanes

2 Riser cage

3 2FH 7mm drive cage

4 7mm drive cage

5 7mm drive cage support clip

6 Four M3 screws

7 Eight M3.5 screws

8 Three labels

• PCIe sequence label (4–5)
• PCIe sequence label (1–2)
• 7mm drive type label NVMe

9 Two 7mm drive fillers

10 One Power cable, 210 mm

11 One SlimSAS x4 to SlimSAS x4 cable, 280 mm

12 One SlimSAS x4 to SlimSAS x4 cable, 135 mm

NOTE

• The illustration in this document might differ slightly from your hardware.

• The break lines indicate that the cable is not shown in its full length. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:

  • "Install the 7mm drive backplanes" in SR650 V3 User Guide

  • "Internal cable routing" in SR650 V3 User Guide

• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.