Skip to main content

ThinkSystem SR650 V3 7mm 2-Bay SATA/NVMe SFF RAID Enablement Kit

See this document for information about the ThinkSystem SR650 V3 7mm 2-Bay SATA/NVMe SFF RAID Enablement Kit.

This option kit comes with the following components.

ThinkSystem SR650 V3 7mm 2-Bay SATA/NVMe SFF RAID Enablement Kit

1 SATA/NVMe 7mm backplanes​

2 Riser cage​

3 2FH 7mm drive cage​

4 7mm drive cage​

5 7mm drive cage support clip​

6 Four M3 screws​

7 Eight M3.5 screws​

8 Four labels​

  • PCIe sequence label (4–5)
  • PCIe sequence label (1–2)
  • 7mm drive type label SATA
  • 7mm drive type label NVMe

9 Two 7mm drive fillers​

10 One SlimSAS x8 to SlimSAS x4 cable, 340 mm​

11 One Mini-SAS HD x4 to SlimSAS x4 cable, 340 mm​

12 One 7mm Power cable, 210 mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925