Skip to main content

ThinkSystem SR650 V4 8x2.5" SAS/SATA Rear Backplane Option Kit

See this document for information about the ThinkSystem SR650 V4 8x2.5" SAS/SATA Rear Backplane Option Kit.

This option kit comes with the following components.

ThinkSystem SR650 V4 8x2.5-inch SAS/SATA Rear Backplane Option Kit

1 One 8x2.5" rear cage assembly​

  • One 8x2.5" SAS/SATA rear backplane
  • One 8x2.5" rear drive cage
  • One 2FH riser cage
  • Eight 1-bay 2.5" drive fillers

2 Two 1FH riser cage fillers​

3 Drive cage brackets​

  • One rearwall bracket A
  • One rearwall bracket B (type 2)
  • One rearwall bracket C

4 Six M3 L3.5 screws​

5 Drive sequence/type label​

  • One SAS/SATA drive sequence (32-39) label
NOTE

The illustration in this document might differ slightly from your hardware.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925