Skip to main content

ThinkSystem SR850 V3/SR860 V3 8x 2.5" SAS/SATA Backplane Option Kit

See this document for information about the ThinkSystem SR850 V3/SR860 V3 8x 2.5" SAS/SATA Backplane Option Kit.

This option kit comes with the following components.

ThinkSystem SR850 V3/SR860 V3 8x 2.5-inch SAS/SATA Backplane Option Kit

1 Eight 2.5-inch drive fillers

2 Three SAS/SATA labels

3 One 2.5-inch 8-bay SAS/SATA backplane

4 One power cable (110 mm)

5 One power cable (190 mm)

6 One Mini-SAS HD x8 to SlimSAS x8 cable (1000 mm)

7 One SlimSAS x8 to SlimSAS x8 cable (1000 mm)

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware installationInternal cable routing
SR850 V3Install a 2.5-inch drive backplaneInternal cable routing
SR860 V3Install a 2.5-inch drive backplaneInternal cable routing
Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925