Skip to main content

ThinkSystem SR860 V3 8x 2.5" AnyBay Backplane Option Kit

See this document for information about the ThinkSystem SR860 V3 8x 2.5" AnyBay Backplane Option Kit.

This option kit comes with the following components.

ThinkSystem SR860 V3 8x 2.5-inch AnyBay Backplane Option Kit

1 Eight 2.5-inch drive fillers​

2 One AnyBay label​

3 One 2.5-inch 8-bay AnyBay backplane​

4 One power cable (110 mm)​

5 One power cable (190 mm)​

6 One Mini-SAS HD x8 to SlimSAS x8 cable (1000 mm)​

7 One SlimSAS x8 to SlimSAS x8 cable (1000 mm)​

8 Two SlimSAS x8 to SlimSAS x8 cable (440 mm)​

9 Four SlimSAS x8 to SlimSAS x8 cable (190 mm)​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925