Skip to main content

ThinkSystem SR950 V3 4x 2.5" SAS/SATA Backplane Option Kit

See this document for information about the ThinkSystem SR950 V3 4x 2.5" SAS/SATA Backplane Option Kit.

This option kit comes with the following components.

ThinkSystem SR950 V3 4x 2.5-inch SAS/SATA Backplane Option Kit

1 One 2.5-inch drive cage​

2 One 2.5-inch drive backplane bracket​

3 One 2.5-inch drive backplane​

4 Two screws​

5 One drive backplane signal cable​

6 One drive backplane power cable​

NOTE

  • The illustration in this document might differ slightly from your hardware.

  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (September 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925