ThinkSystem ST650 V3 2.5" AnyBay 8-Bay Backplane Kit
See this document for information about the ThinkSystem ST650 V3 2.5" AnyBay 8-Bay Backplane Kit.
This option kit comes with the following components.
1 One 2.5" AnyBay 8-Bay Backplane
2 One PDB to 2.5" BP power cable, 455mm
3 One PDB to 2.5" BP power cable, 355mm
4 One RAID Mini-SAS x2 to BP Slimline cable, 640mm
5 One RAID Slimline to BP Slimline cable, 720mm
6 One RAID Slimline to BP Slimline cable, 880mm
7 One RAID Mini-SAS x2 to BP Slimline cable, 930mm
8 One PCIe 3/4 or PCIe 5/6 Slimline x2 to BP Slimline x2 cable, 420mm
9 One PCIe 1/2 Slimline x2 to BP Slimline x2 cable, 530mm
10 One HDD sequence label of AnyBay
11 Eight 2.5" storage drive fillers (single bay)
-
The illustration in this document might differ slightly from your hardware.
-
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
-
To install the option, refer to:
-
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925