ThinkSystem ST650 V3 2.5" SAS/SATA 8-Bay Backplane Kit
See this document for information about the ThinkSystem ST650 V3 2.5" SAS/SATA 8-Bay Backplane Kit.
This option kit comes with the following components.
1
One 2.5" SAS/SATA 8-Bay Backplane
2
One PDB to 2.5" BP power cable, 455mm
3
One PDB to 2.5" BP power cable, 355mm
4
One RAID Mini-SAS x2 to BP Slimline cable, 640mm
5
One RAID Slimline to BP Slimline cable, 720mm
6
One RAID Slimline to BP Slimline cable, 880mm
7
One RAID Mini-SAS x2 to BP Slimline cable, 930mm
8
One Slimline x2 to 2.5" BP Slimline cable, 700mm
9
One HDD sequence label of SAS/SATA
10
Eight 2.5" storage drive fillers (single bay)
NOTE
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (May 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925