Skip to main content

ThinkSystem ST650 V3 3.5" AnyBay 4-Bay Backplane Kit

See this document for information about the ThinkSystem ST650 V3 3.5" AnyBay 4-Bay Backplane Kit.

This option kit comes with the following components.

ThinkSystem ST650 V3 3.5 AnyBay 4-Bay Backplane Kit

1 One 3.5" AnyBay 4-Bay Backplane​

2 One PDB to 3.5" BP power cable, 455mm​

3 One PDB to 3.5" BP power cable, 355mm​

4 One PDB to 3.5" BP power cable, 160mm​

5 One RAID Mini-SAS x2 to BP Slimline x2 cable, 590mm​

6 One RAID Mini-SAS x2 to BP Slimline x2 cable, 840mm​

7 One RAID Slimline to BP Slimline x2 cable, 590mm​

8 One RAID Slimline to BP Slimline x2 cable, 840mm​

9 One PCIe 3/4 or PCIe 5/6 Slimline x2 to BP Slimline x2 cable, 420mm​

10 One PCIe 1/2 Slimline x2 to BP Slimline x2 cable, 420mm​

11 One HDD sequence label of AnyBay​

12 Four 3.5" storage drive fillers (single bay)​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925