Skip to main content

ThinkSystem 1U V3 4 x 2.5" Gen5 Backplane Option Kit for Front I/O Module

See this document for information about the following option kits:

  • ThinkSystem 1U V3 4 x 2.5" Anybay Gen5 Backplane Option Kit for Front I/O Module

  • ThinkSystem 1U V3 4 x 2.5" NVMe Backplane Option Kit for Front I/O Module

The option kits come with the following components.

ThinkSystem 1U V3 4 x 2.5-inch AnyBay Gen5 Backplane Option Kit for Front I/O Module

1 One 1U 4 x 2.5-inch Anybay Gen5 backplane with a short bracket​

2 Four 1-bay 2.5-inch drive fillers​

3 Drive and OCP label​

  • One 1U 4 x 2.5" NVMe w/ front OCP label
  • One 1U 4 x 2.5" SATA/NVMe w/ front OCP label
  • One 1U 4 x 2.5" Anybay w/ front OCP label
  • One 1U 4 x 2.5" SAS/SATA/U.3 w/ front OCP label
NOTE
  • The illustration in this document might differ slightly from your hardware.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925