Skip to main content

ThinkSystem SR630 V3 7mm SATA/NVMe CFF RAID Enablement Kit

See this document for information about the ThinkSystem SR630 V3 7mm SATA/NVMe CFF RAID Enablement Kit.

This option kit comes with the following components.

ThinkSystem SR630 V3 7mm SATA/NVMe CFF RAID Enablement Kit

1 One 1U 2-bay 7mm drive cage​

2 Two 1-bay 7mm drive fillers​

3 7mm drive backplanes​

  • One 7mm NVME 2-Bay rear backplane (top)
  • One 7mm SATA/NVMe 2-Bay rear backplane (bottom)

4 Three M3.5 screws​

5 Drive sequence label​

  • One 1U 7mm rear SATA sequence label
  • One 1U 7mm rear NVMe sequence label

6 One power cable, 100mm/160mm​

7 One SlimSAS x4 to SlimSAS x4 cable, 850mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925