ThinkSystem SR630 V4 10x2.5" AnyBay Gen5 Backplane Option Kit
See this document for information about the ThinkSystem SR630 V4 10x2.5" AnyBay Gen5 Backplane Option Kit.
This option kit comes with the following components.
1
One 10x2.5" AnyBay front backplane
2
Six 2.5" HDD fillers
3
One 4x2.5" HDD filler
4
Drive sequence/type label
- One 6 SAS/SATA + 2 AnyBay + 2 NVMe label
- One 6 SAS/SATA + 4 AnyBay label
- One 10x2.5" NVMe label
- One 10x2.5" AnyBay label
- One 10x2.5" SAS/SATA/U.3 HDD type label
- One 10x2.5" SAS/SATA HDD sequence label
NOTE
The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to "Install the front 2.5-inch drive backplane" in SR630 V4 User Guide.
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925