Skip to main content

Thinksystem SR630 V4 4x2.5" AnyBay Gen5 Backplane Option Kit

See this document for information about the Thinksystem SR630 V4 4x2.5" AnyBay Gen5 Backplane Option Kit.

This option kit comes with the following components.

Thinksystem SR630 V4 4x2.5-inch AnyBay Gen5 Backplane Option Kit

1 One 4x2.5" AnyBay backplane​

2 One 4x2.5" backplane short bracket​

3 One 1U 2x2.5" fixed filler​

4 Drive sequence/type label​

  • One 1U 4x2.5" SATA/SAS HDD type label
  • One 1U 8x2.5" SAS/SATA/U.3 HDD type label
  • One 1U 2.5" NVMe HDD sequence label
  • One 1U 4x2.5" NVMe HDD type label
  • One 1U 4x2.5" Anybay HDD type label
  • One 1U 4x2.5" SAS/SATA/U.3 type label

5 One 4x2.5" HDD filler​

6 Four 2.5" HDD fillers​

7 One 4x2.5" backplane long bracket​

NOTE

The illustration in this document might differ slightly from your hardware.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925