Skip to main content

ThinkSystem V3 1U 10 x 2.5" Gen5 Backplane Option Kit

See this document for information about the following option kits.

  • ThinkSystem V3 1U 10 x 2.5" AnyBay Backplane Gen5 Option Kit

  • ThinkSystem V3 1U 10 x 2.5" NVMe Backplane Gen5 Option Kit

The option kits come with the following components.

ThinkSystem V3 1U 10 x 2.5-inch Gen5 Backplane Option Kit

1 One 10-bay 2.5-inch AnyBay backplane​

2 Six 1-bay 2.5-inch drive fillers​

3 One 4-bay 2.5-inch drive filler​

4 Drive type label​

  • One 1U 10 x 2.5" NVMe HDD type label
  • One 1U 10 x 2.5" AnyBay HDD type label
NOTE
  • The illustration in this document might differ slightly from your hardware.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware replacementInternal cable routing
SR630 V3Backplane replacementInternal cable routing
SR635 V3Backplane replacementInternal cable routing
SR645 V3Front drive backplane replacementInternal cable routing
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925