Skip to main content

ThinkSystem SR635 V3 / SR645 V3 7mm B540p-2HS SATA/NVMe RAID Enablement Kit

See this document for information about the ThinkSystem SR635 V3 / SR645 V3 7mm B540p-2HS SATA/NVMe RAID Enablement Kit.

This option kit comes with the following components.

ThinkSystem SR635 V3 / SR645 V3 7mm B540p-2HS SATA/NVMe RAID Enablement Kit

1 7mm RAID B540p-2HS SATA/NVMe kit​

  • 7mm drive backplane (top)
  • 7mm drive backplane (bottom)

2 One 7mm drive cage​

3 Two 7mm drive bay fillers​

4 One LP SlimSAS x4 to SlimSAS x4 cable, 125 mm​

5 One power cable, 160 mm / 100 mm​

6 One label​

7 One label​

NOTE

  • The illustration in this document might differ slightly from your hardware.

  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware replacementInternal cable routing
SR635 V3Install the 7mm drive backplanesInternal cable routing
SR645 V3Install the 7mm drive backplanesInternal cable routing
Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (January 2024)

© Copyright Lenovo 2024.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925