Skip to main content

ThinkSystem SD550 V3 Anybay 6 Drive Backplane Kit with Cables

See this document for information about the ThinkSystem SD550 V3 Anybay 6 Drive Backplane Kit with Cables.

This option kit comes with the following components.

ThinkSystem SD550 V3 Anybay 6 Drive Backplane Kit with Cables

1 One SD550 V3 6-bay anybay backplane​

2 One BP power and sideband cable (power 2x8 to power 2x4 and power 2x10, 640 mm / 550mm)​

3 One BP NVMe cable (MCIO x8 to MCIO x8, 450 mm)​

4 One BP NVMe cable (MCIO x16 to MCIO x8*2, 85 mm / 110 mm)​

5 One BP SAS/SATA cable (Low-profile SlimSAS x8 to SlimSAS x4*2, 65mm / 110 mm)​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (March 2024)

© Copyright Lenovo 2024.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925