ThinkSystem SR655 V3 8x2.5" SAS/SATA Middle Backplane Option Kit

See this document for information about the ThinkSystem SR655 V3 8x2.5" SAS/SATA Middle Backplane Option Kit.

This option kit comes with the following components.

1 Two 4X2.5" SAS/SATA backplanes

2 One 8X2.5" SAS/SATA middle drive cage

3 Eight 1x1 2.5" HDD fillers

4 One 2U performance heat sink

5 Two drive sequence labels 32–39 SAS/SATA

6 One M3 screw

7 Two top cover support sponges

Option installation

• To install the option, refer to:
  • "Install the middle drive backplanes and drive cage" at SR655 V3 User Guide
  • "Internal cable routing" at SR655 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (June 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925