ThinkSystem SR650 V2 7mm 2-bay NVMe/SATA RAID kit
This flyer is applicable to the following two Raid Enablement Kits:
- ThinkSystem SR650 V2 7mm SATA 2-Bay Raid Enablement Kit
- ThinkSystem SR650 V2 7mm NVMe 2-Bay Raid Enablement Kit
The option package contains the following items:
Configuration 1: 7mm drive cage integrated in a riser cage
1a Riser cage
1b Riser card
1c 7mm drive cage
1d 7mm drive cage support clip
1e M3 screws (2)
1f M3.5 screws (8)
Configuration 2: Stand–alone 7mm drive cage
2 7mm drive cage assembly
Common parts:
3a SATA/NVMe 7mm backplane (Top)
3b 7mm backplane (Bottom)
3c 7mm drive fillers (2)
3d Power cable, 175 mm (6.89 inches)
3e Signal cable, 140 mm (5.51 inches)
3f Labels
- PCIe 4–5 sequence label (for config. 1)
- PCIe 1–2 sequence label (for config. 2)
- 7mm drive type label (SATA/NVMe)
For information about installing the option, refer to “Server hardware setup” chapter in Setup Guide. The most up-to-date Setup Guide is always available for download at https://thinksystem.lenovofiles.com/help/index.jsp.
To get the latest technical information and download device drivers and updates, go to https://datacentersupport.lenovo.com/.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
Second Edition (October 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925