ThinkSystem V3 1U 10 x 2.5" Gen4 AnyBay Backplane Option Kit
See this document for information about the following option kits:
ThinkSystem V3 1U 10 x 2.5" NVMe Gen4 Backplane Kit
ThinkSystem V3 1U 10 x 2.5" AnyBay Gen4 Backplane Option Kit
The option kits come with the following components.
1
One 10-bay 2.5-inch AnyBay backplane
2
Six 1-bay 2.5-inch drive fillers
3
One 4-bay 2.5-inch drive filler
4
Drive type/sequence label
- One 1U 10 x 2.5" AnyBay HDD type label
- One 1U 8 x 2.5" SAS/SATA/U.3 HDD type label
- One 1U 10 x 2.5" NVMe HDD type label
- One 1U 10 x 2.5" SAS/SATA/U.3 HDD sequence label
NOTE
- The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
Server model | Hardware installation |
---|---|
SR630 V3 | Install the front 2.5-inch drive backplane |
SR635 V3 | Install the front 2.5-inch drive backplane |
SR645 V3 | Install the front 2.5'' drive backplane |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (February 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925