Skip to main content

ThinkSystem V3 1U 4 x 3.5" Backplane Option Kit

This document is applicable to the following option kits.

  • ThinkSystem V3 1U 4 x 3.5" SAS/SATA Backplane Option Kit

  • ThinkSystem V3 1U 4 x 3.5" AnyBay Backplane Option Kit

The option kits come with the following components.

ThinkSystem V3 1U 4 x 3.5-inch Backplane Option Kit

1 One 4-bay 3.5-inch AnyBay backplane​

2 Four 1-bay 3.5-inch drive fillers​

3 Drive type label​

  • One 1U 4 x 3.5" SATA/NVMe HDD type label
  • One 1U 4 x 3.5" AnyBay HDD type label
  • One 1U 4 x 3.5" SATA HDD type label
  • One 1U 4 x 3.5" SAS/SATA HDD type label
NOTE
  • The illustration in this document might differ slightly from your hardware.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware installation
SR630 V3Install the front 3.5-inch drive backplane
SR645 V3Install the front 3.5'' drive backplane
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925