Skip to main content

ThinkSystem ST250 Series 4x3.5" Simple Swap Backplane Kit

See this document for information about the ThinkSystem ST250 Series 4x3.5" Simple Swap Backplane Kit.

The option kits come with the following components.

ThinkSystem ST250 Series 4x3.5" Simple Swap Backplane Kit

1 RAID flash power module extension cable (190 mm)​

2 One 3.5-inch Bay 4-7 simple-swap backplate​

3 One 3.5-inch Bay 4-5 simple-swap backplate​

4 Four 3.5-inch drive fillers​

5 One 3.5-inch drive cage​

6 One 9225 front system fan​

7 Two drive filler alarm labels for optical disk drives​

8 RAID flash power module holder for RAID 940-8i​

9 RAID flash power module holder for RAID 9350-16i and 9350-8i​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware installationInternal cable routing
ST250 V2Install the 3.5-inch simple-swap drive backplateInternal cable routing
ST250 V3Install the 3.5-inch simple-swap drive backplateInternal cable routing
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (October 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925