Skip to main content

ThinkSystem SR250 Series 10x2.5" Hot Swap SAS/SATA Backplane Kit

See this document for information about the ThinkSystem SR250 Series 10x2.5" Hot Swap SAS/SATA Backplane Kit.

This option kit comes with the following components.

ThinkSystem SR250 Series 10x2.5-inch Hot Swap SAS/SATA Backplane Kit

1 One backplane, ten 2.5-inch hot-swap drives​

2 Ten 2.5-inch drive fillers​

3 One power cable​

4 One flash power module extension cable​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware installationInternal cable routing
SR250 V2Install the 2.5-inch backplaneInternal cable routing
SR250 V3Install the 2.5-inch backplaneInternal cable routing
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2024)

© Copyright Lenovo 2024.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925