Skip to main content

ThinkSystem SR250 Series 4x 3.5" Simple Swap Backplane Kit

See this document for information about the ThinkSystem SR250 Series 4x 3.5" Simple Swap Backplane Kit.

This option kit comes with the following components.

ThinkSystem SR250 Series 4x 3.5-inch Simple Swap Backplane Kit

1 One backplate, four 3.5-inch simple-swap drives (connects to Gen 3 RAID adapter)​

2 One backplate, four 3.5-inch simple-swap drives (connects to Gen 4 RAID adapter)​

3 One flash power module extension cable​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware installationInternal cable routing
SR250 V2Install the 3.5-inch backplateInternal cable routing
SR250 V3Install the 3.5-inch backplateInternal cable routing
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2024)

© Copyright Lenovo 2024.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925