ThinkSystem ST50/ST45 Series 3.5" 2TB 7.2K SATA 6Gb Non-Hot Swap 512n HDD
See this document for information about the ThinkSystem ST50/ST45 Series 3.5" 2TB 7.2K SATA 6Gb Non-Hot Swap 512n HDD.
This option kit comes with the following components.
1 One 3.5" 2TB HDD
2 One drive tray
3 One signal cable, 185 mm
NOTE
-
The illustration in this document might differ slightly from your hardware.
-
The break lines indicate that the cable is not shown in its full length. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation | Internal cable routing |
|---|---|---|
| ST50 V2 | Drive and drive cage replacement | Internal cable routing |
| ST50 V3 | Drive and drive cage replacement | Internal cable routing |
| ST45 V3 | Drive and drive cage replacement | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Give documentation feedback