Skip to main content

ThinkEdge SE455 V3 Security Bezel Kit / SE455 V3 OEM Security Bezel Kit

See this document for information about the ThinkEdge SE455 V3 Security Bezel Kit / SE455 V3 OEM Security Bezel Kit.

This option kit comes with the following components.

ThinkEdge SE455 V3 Security Bezel Kit / SE455 V3 OEM Security Bezel Kit

1 One security bezel​

2 One security bezel keylock bracket​

3 Two M3 screws for security bezel keylock bracket and bezel detect switch​

4 One bezel detect switch with cable​

5 One air flow sensor board​

6 Two M3 screws for air flow sensor board​

7 One air flow sensor cable, 150mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925