Skip to main content

ThinkSystem SR630 V2 4x3.5" AnyBay Backplane Cable Kit

See this document for information about the ThinkSystem SR630 V2 4x3.5" AnyBay Backplane Cable Kit.

This option kit comes with the following components.

ThinkSystem SR630 V2 4x3.5-inch AnyBay Backplane Cable kit

1 Power cable, 520 mm (x1)​

  • From: Backplane
  • To: System board

2 PCIe cable, 295/430 mm (x1)​

  • From: Backplane
  • To: System board

3 SAS/SATA cable, 710 mm (x1)​

  • From: Backplane
  • To: System board

4 SAS/SATA cable, 690 mm (x1)​

  • From: Backplane
  • To: SFF RAID adapter

5 SAS/SATA cable, 590 mm (x1)​

  • From: Backplane
  • To: SFF RAID adapter
NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (October 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925