ThinkSystem SR630 V2 6SATA/SAS+4AnyBay Backplane NVMe Cable Kit
See this document for information about the ThinkSystem SR630 V2 6SATA/SAS+4AnyBay Backplane NVMe Cable Kit.
This option kit comes with the following components.
1 Power cable, 330 mm (x1)
- From the front backplane to the system board
2 Power cable, 230 mm (x1)
- From the system board to the CFF RAID adapter
3 PCIe cable, 345/428 mm (x1)
- From the front backplane to the system board
4 PCIe cable, 470 mm (x1)
- From the system board to the CFF RAID adapter
5 PCIe cable, 425 mm (x1)
- From the system board to the CFF RAID adapter
NOTE
- The illustration in this document might differ slightly from your hardware.
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
Second Edition (October 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925