Skip to main content

ThinkSystem SR645 V3 8x2.5" SAS/SATA Backplane Cable Option Kit

See this document for information about the ThinkSystem SR645 V3 8x2.5" SAS/SATA Backplane Cable Option Kit.

This option kit comes with the following components.

ThinkSystem SR645 V3 8x2.5" SAS/SATA Backplane Cable Option Kit

1 One SlimSAS x8 to SlimSAS x4*2 cable, 860 mm / 710 mm​

2 One SlimSAS x4*2 to Mini-SAS HD x4*2 cable, 860 mm / 690 mm​

3 One SlimSAS x4 to SlimSAS x4 cable, 175 mm​

4 One SlimSAS x4 to SlimSAS x4 cable, 110 mm​

5 One MCIO x8 to SlimSAS x4*2 cable, 880 mm / 760 mm​

6 One power cable, 210 mm​

7 One MCIO x4 to SlimSAS x4 cable, 720mm​

8 One MCIO x4 to SlimSAS x4 cable, 750mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Third Edition (November 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925