Skip to main content

ThinkSystem SD535 V3 M.2 NVME + SATA Cable Kit

See this document for information about the ThinkSystem SD535 V3 M.2 NVME + SATA Cable Kit.

This option kit comes with the following components.

ThinkSystem SD535 V3 M.2 NVME + SATA Cable Kit

1 One M.2 RAID adapter bracket​

2 One M.2 boot adapter cable (sideband 2x10 + low-profile SlimSAS x8 to M.2 boot adapter, 300 mm / 320 mm)​

3 One Screw​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925