ThinkSystem SD665 V3 Socket-Direct Cable

See this document for information about the ThinkSystem SD665 V3 Socket-Direct Cable.

This option kit comes with the following component.

1 Two screws

2 Two washers

3 Interconnect cable

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install a PCIe adapter" in SD665 V3 User Guide and "Install a PCIe riser assembly (ConnectX-7 NDR 400)" in SD665 V3 User Guide
  • "Internal cable routing" at SD665 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (November 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925