ThinkEdge SE360 V2 External 300W Bridge Cable

See this document for information about the ThinkEdge SE360 V2 External 300W Bridge Cable.

This option kit comes with the following component.

1 One external 300W bridge cable

NOTE

• The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option, refer to:
  • "Rear view" in SE360 V2 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925