Skip to main content

ThinkSystem SR250 V3/ST250 V3 M.2 Cable Kit

See this document for information about the ThinkSystem SR250 V3/ST250 V3 M.2 Cable Kit.

The option kits come with the following components.

ThinkSystem SR250 V3/ST250 V3 M.2 Cable Kit

1 One M.2 boot adapter power cable (130 mm)​

2 One M.2 boot adapter signal cable (100/160/150 mm)​

3 One M.2 boot adapter power and signal cable (130/130 mm)​

4 One PCIe adapter​

5 One PCIe Low-Profile bracket​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware installationInternal cable routing
ST250 V3Install the M.2 boot adapterInternal cable routing
SR250 V3Install the M.2 boot adapterInternal cable routing
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (October 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925