ThinkSystem 1U V3 4 x 2.5" NVMe Backplane Cable Kit for Front I/O Module

See this document for information about the ThinkSystem 1U V3 4 x 2.5" NVMe Backplane Cable Kit for Front I/O Module.

This option kit comes with the following components.

1 Two MCIO x8 to MCIO x8 cables, 630mm

2 One power cable, 570mm

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install the front 2.5-inch drive backplane" in SR630 V3 User Guide
  • "Internal cable routing" in SR630 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925