Skip to main content

ThinkSystem 1U V3 4 x 2.5" Anybay Gen5 Backplane SAS/SATA Cable Kit for Front I/O Module

See this document for information about the ThinkSystem 1U V3 4 x 2.5" Anybay Gen5 Backplane SAS/SATA Cable Kit for Front I/O Module.

This option kit comes with the following components.

ThinkSystem 1U V3 4 x 2.5-inch Anybay Gen5 Backplane SAS/SATA Cable Kit for Front I/O Module

1 One power cable, 600mm​

2 One SlimSAS x8 to SlimSAS x4*2 cable, 270mm/860mm​

3 One power cable, 570mm​

4 One LP SlimSAS x4 to SlimSAS x4 cable, 780mm​

5 One Mini-SAS HD x4 to SlimSAS x4 cable, 880mm​

6 One SlimSAS x8 to SlimSAS x4 cable, 880mm​

7 One MCIO x8 to MCIO x8 cable, 370mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925