ThinkSystem SR630 V4 10x2.5" AnyBay Backplane NVMe Cable Kit for CPU+MEM DWC Module
See this document for information about the ThinkSystem SR630 V4 10x2.5" AnyBay Backplane NVMe Cable Kit for CPU+MEM DWC Module.
This option kit comes with the following components.
1 One power Y cable, 830/830mm
2 Two MCIO x8 to MCIO x8 cables, 350mm
3 Three MTK x8 to MCIO x8 cables, 600mm
4 One power cable, 700mm
5 One power cable, 800mm
6 Two MCIO x8 to MCIO x8 cables, 350mm
NOTE
-
The illustration in this document might differ slightly from your hardware.
-
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925