ThinkSystem SR635 V3 10x2.5" AnyBay Backplane Gen5 NVMe Cable Kit
See this document for information about the ThinkSystem SR635 V3 10x2.5" AnyBay Backplane Gen5 NVMe Cable Kit.
This option kit comes with the following components.
1
One power cable, 780 mm
2
One Swift x8 to MCIO x8 cable, 590 mm
3
One Swift x8*2 to MCIO x8*2 cable, 520/520 mm
4
One Swift x8*2 to MCIO x8*2 cable, 440/440 mm
5
One Swift x8 to MCIO x8 cable, 520 mm
NOTE
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (April 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925