ThinkSystem SR635 V3 10x2.5" SAS/SATA Backplane Cable Kit
See this document for information about the ThinkSystem SR635 V3 10x2.5" SAS/SATA Backplane Cable Kit.
This option kit comes with the following components.
1
One power cable, 650 mm
2
One SlimSAS x8 to SlimSAS x4*2 cable, 710/860 mm
3
One SlimSAS x8 to SlimSAS x4 cable, 580 mm
4
One Mini-SAS HD x4 to SlimSAS x4 cable, 610 mm
5
One Mini-SAS HD x4*2 to SlimSAS x4*2 cable, 690/860 mm
6
One SlimSAS x8 to SlimSAS x4*2 cable, 530/690 mm
7
One SlimSAS x4 to SlimSAS x4 cable, 370 mm
NOTE
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (April 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925