ThinkSystem SR650/a V4 2.5" Chassis Front BP1 SAS/SATA Cable Kit
See this document for information about the ThinkSystem SR650/a V4 2.5" Chassis Front BP1 SAS/SATA Cable Kit.
The option kit comes with the following components.
1 One Mini-SAS HD x8 to SlimSAS x8 cable, 900 mm
2 One SlimSAS x8 to SlimSAS x8 cable, 900 mm
3 One Mini-SAS HD x8 to SlimSAS x8 cable, 1020 mm
4 One SlimSAS x8 to SlimSAS x8 cable, 1020 mm
5 One SlimSASx8 to SlimSAS x4 *2 cable, 140/140 mm
6 One power cable, 250 mm
7 One power cable, 900 mm
NOTE
-
The illustration in this document might differ slightly from your hardware.
-
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation | Internal cable routing |
|---|---|---|
| SR650 V4 | Install the front drive backplane | Internal cable routing |
| SR650a V4 | Install the 2.5-inch drive cage and drive backplane | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925